SHTNAK=0, TYPE=00, BFRE=0, DBLB=0, DIR=0
Pipe Configuration Register
| EPNUM | Endpoint NumberThese bits specify the endpoint number for the selected pipe.Setting 0000b means unused pipe. |
| DIR | Transfer Direction 0 (0): Receiving direction 1 (1): Transmitting direction |
| Reserved | This bit is read as 0. The write value should be 0. |
| Reserved | This bit is read as 0. The write value should be 0. |
| SHTNAK | Pipe Disabled at End of Transfer 0 (0): Pipe assignment continued at the end of transfer 1 (1): Pipe assignment disabled at the end of transfer |
| Reserved | This bit is read as 0. The write value should be 0. |
| DBLB | Double Buffer Mode 0 (0): Single buffer 1 (1): Double buffer |
| BFRE | BRDY Interrupt Operation Specification 0 (0): BRDY interrupt upon transmitting or receiving data 1 (1): BRDY interrupt upon completion of reading data |
| Reserved | These bits are read as 000. The write value should be 000. |
| TYPE | Transfer Type 0 (00): Pipe not used 1 (01): Bulk transfer(PIPE1 and PIPE5) /Setting prohibited(PIPE6 to PIPE9) 2 (10): Setting prohibited(PIPE1 and PIPE5) /Interrupt transfer(PIPE6 to PIPE9) 3 (11): Isochronous transfer(PIPE1 and PIPE2) /Setting prohibited(PIPE3 to PIPE9) |